Seth Woolley's Man Viewer

tbl(1) - tbl - format tables for troff - man 1 tbl

([section] manual, -k keyword, -K [section] search, -f whatis)
man plain no title

TBL(1)                                                                  TBL(1)

       tbl - format tables for troff

       tbl [ -Cv ] [ files... ]

       This manual page describes the GNU version(1,3,5) of tbl, which is part of the
       groff(1,7) document formatting system.  tbl compiles descriptions of  tables
       embedded  within troff input files into commands that are understood by
       troff.  Normally, it should be invoked using the -t  option  of  groff.
       It is highly compatible with Unix tbl.  The output generated by GNU tbl
       cannot be processed with Unix troff; it  must  be  processed  with  GNU
       troff.   If  no files are given on the command line, the standard input
       will be read.  A filename of - will cause  the  standard  input  to  be

       -C     Recognize  .TS  and  .TE even when followed by a character other
              than space or newline.

       -v     Print the version(1,3,5) number.

       tbl expects to find table descriptions wrapped in(1,8) the .TS (table start)
       and  .TE  (table  end)  macros.  The line immediately following the .TS
       macro may contain any of the following  global  options  (ignoring  the
       case of characters -- Unix tbl only accepts options with all characters
       lowercase or all characters uppercase):

       center Centers the table (default is left-justified).  The  alternative
              keyword name centre is also recognized (this is a GNU tbl exten-

              Use x and y as start and end delimiters for eqn(1).

       expand Makes the table as wide as the current line length.

       box    Encloses the table in(1,8) a box.

              Encloses the table in(1,8) a double box.

       allbox Encloses each item of the table in(1,8) a box.

       frame  Same as box (GNU tbl only).

              Same as doublebox (GNU tbl only).

       tab(x) Uses the character x instead of a tab to  separate  items  in(1,8)  a
              line of input data.

              Sets lines or rules (e.g. from box) in(1,8) n-point type.

       nokeep Don't  use  diversions  to  prevent  page breaks (GNU tbl only).
              Normally tbl attempts to prevent undesirable breaks in(1,8) the table
              by  using  diversions.   This  can sometimes interact badly with
              macro packages' own use of diversions, when footnotes, for exam-
              ple, are used.

              Set  the  character  to  be  recognized  as the decimal point in(1,8)
              numeric columns (GNU tbl only).

              Ignore leading and trailing spaces in(1,8) data items (GNU tbl only).

       The  global  options  must end with a semicolon.  There might be white-
       space after an option and its argument in(1,8) parentheses.

       After global options come lines describing the format of each  line  of
       the  table.   Each  such  format  line  describes one line of the table
       itself, except that the last format line (which you  must  end  with  a
       period) describes all remaining lines of the table.  A single key char-
       acter describes each column of each line of the  table.   You  may  run
       format specs for multiple lines together on the same line by separating
       them with commas.

       You may follow each key character with specifiers  that  determine  the
       font  and  point  size of the corresponding item, that determine column
       width, inter-column spacing, etc.

       The longest format line defines the number of  columns  in(1,8)  the  table;
       missing format descriptors at the end of format lines are assumed to be
       `L'.  Extra columns in(1,8) the data (which  have  no  corresponding  format
       entry) are ignored.

       The available key characters are:

       c,C    Centers item within the column.

       r,R    Right-justifies item within the column.

       l,L    Left-justifies item within the column.

       n,N    Numerically  justifies  item  in(1,8)  the column: Units positions of
              numbers are aligned vertically.

       s,S    Spans previous item on the left into this column.

       a,A    Centers longest line in(1,8) this column and then left-justifies  all
              other lines in(1,8) this column with respect to that centered line.

       ^      Spans down entry from previous row in(1,8) this column.

       _,-    Replaces this entry with a horizontal line.

       =      Replaces this entry with a double horizontal line.

       |      The  corresponding  column  becomes  a  vertical rule (if(3,n) two of
              these are adjacent, a double vertical rule).

       A vertical bar to the left of the first key-letter or to the  right  of
       the last one produces a line at the edge of the table.

       Here  are the specifiers that can appear in(1,8) suffixes to column key let-

       b,B    Short form of fB (make affected entries bold).

       i,I    Short form of fI (make affected entries italic).

       t,T    Start an item vertically spanning rows at the top of  its  range
              rather than vertically centering it.

       d,D    Start  an  item  vertically  spanning  rows at the bottom of its
              range rather than vertically centering it (GNU tbl only).

       v,V    Followed by a number, this indicates the vertical  line  spacing
              to  be used in(1,8) a multi-line table entry.  If signed, the current
              vertical line spacing is incremented  or  decremented  (using  a
              signed number instead of a signed digit is a GNU tbl extension).
              A vertical line spacing specifier followed by a  column  separa-
              tion  number must be separated by one or more blanks.  No effect
              if(3,n) the corresponding table entry isn't a text block.

       f,F    Either of these specifiers  may  be  followed  by  a  font  name
              (either  one  or  two  characters  long),  font number (a single
              digit), or long name in(1,8) parentheses (the last form is a GNU  tbl
              extension).   A one-letter font name must be separated by one or
              more blanks from whatever follows.

       p,P    Followed by a number, this does a  point  size  change  for  the
              affected  fields.   If  signed, the current point size is incre-
              mented or decremented (using a signed number instead of a signed
              digit  is a GNU tbl extension).  A point size specifier followed
              by a column separation number must be separated by one  or  more

       w,W    Minimal  column  width  value.   Must  be  followed  either by a
              troff(1) width expression in(1,8) parentheses or a unitless  integer.
              If  no  unit  is  given,  en  units(1,7)  are used.  Also used as the
              default line length for included text blocks.  If used  multiple
              times  to  specify  the  width for a particular column, the last
              entry takes effect.

       x,X    This is a GNU tbl extension.  Either of these specifiers may  be
              followed by a macro name (either one or two characters long), or
              long name in(1,8) parentheses.  A one-letter macro name must be sepa-
              rated  by  one  or more blanks from whatever follows.  The macro
              which name can be specified here must be defined before creating
              the  table.   It  is called just before the table's cell text is
              output.  As implemented currently, this macro is only called  if(3,n)
              block  input  is used, that is, text between `T{' and `T}'.  The
              macro should contain only simple troff requests  to  change  the
              text  block formatting, like text adjustment, hyphenation, size,
              or font.  The macro is called  after  other  cell  modifications
              like  b,  f or v are output.  Thus the macro can overwrite other
              modification specifiers.

       e,E    Make equally-spaced columns.

       u,U    Move the corresponding column up one half-line.

       z,Z    Ignore the corresponding column for width-calculation  purposes.

       A  number  suffix on a key character is interpreted as a column separa-
       tion in(1,8) ens (multiplied in(1,8) proportion if(3,n)  the  expand  option  is  on).
       Default separation is 3n.

       The  format  lines are followed by lines containing the actual data for
       the table, followed finally by .TE.  Within such data lines, items  are
       normally  separated  by tab characters (or the character specified with
       the tab option).  Long input lines can be broken across multiple  lines
       if(3,n) the last character on the line is `\' (which vanishes after concate-

       A dot starting a line, followed by anything but a digit is handled as a
       troff  command,  passed through without changes.  The table position is
       unchanged in(1,8) this case.

       If a data line consists of only `_' or `=', a single  or  double  line,
       respectively, is drawn across the table at that point; if(3,n) a single item
       in(1,8) a data line consists of only `_' or `=', then that item is  replaced
       by  a  single  or  double line, joining its neighbours.  If a data item
       consists only of `\_' or `\=', a single or double  line,  respectively,
       is  drawn across the field at that point which does not join(1,n) its neigh-

       A data item consisting only of `\Rx' (`x' any character) is replaced by
       repetitions  of  character  `x'  as wide as the column (not joining its

       A data item consisting only of `\^' indicates that  the  field  immedi-
       ately above spans downward over this row.

       A text block can be used to enter data as a single entry which would be
       too long as a simple string(3,n) between tabs.  It is started with `T{'  and
       closed  with  `T}'.   The  former  must end a line, and the latter must
       start a line, probably followed by other data columns  (separated  with
       tabs).  By default, the text block is formatted with the settings which
       were active before entering the table, possibly overridden by the v and
       w  tbl  specifiers.  For example, to make all text blocks ragged-right,
       insert .na right before the starting .TS (and .ad after the table).

       To change the data format within a table, use the .T& command  (at  the
       start  of  a  line).   It  is followed by format and data lines (but no
       global options) similar to the .TS request.

       tbl(1) should always be called before  eqn(1)  (groff(1,7)(1)  automatically
       takes care of the correct order of preprocessors).

       There is no limit on the number of columns in(1,8) a table, nor any limit on
       the number of text blocks.  All the lines of a table are considered  in(1,8)
       deciding  column  widths,  not  just the first 200.  Table continuation
       (.T&) lines are not restricted to the first 200 lines.

       Numeric and alphabetic items may appear in(1,8) the same column.

       Numeric and alphabetic items may span horizontally.

       tbl uses register, string(3,n), macro and diversion names beginning with the
       digit  3.   When  using  tbl you should avoid using any names beginning
       with a 3.

       You should use .TS H/.TH in(1,8) conjunction with a supporting macro package
       for  all  multi-page boxed tables.  If there is no header that you wish
       to appear at the top of each page of the  table,  place  the  .TH  line
       immediately  after the format section.  Do not enclose a multi-page ta-
       ble within keep/release macros, or divert it in(1,8) any other way.

       A text block within a table must be able to fit on one page.

       The bp request cannot be used to force a page-break in(1,8) a multi-page ta-
       ble.  Instead, define BP as follows

              .de BP
              .ie '\\n(.z'' .bp \\$1
              .el \!.BP \\$1

       and use BP instead of bp.

       Using  \a  directly  in(1,8)  a table to get leaders will not work.  This is
       correct behaviour: \a is an uninterpreted leader.  To get leaders use a
       real leader, either by using a control A or like this:

              .ds a \a
              lw(1i) l.

       Lesk, M.E.: "TBL -- A Program to Format Tables".  For copyright reasons
       it cannot be included in(1,8) the groff(1,7)  distribution,  but  copies  can  be
       found with a title search on the World Wide Web.

       groff(1,7)(1), troff(1)

Groff Version 1.19.1             10 March 2004                          TBL(1)

References for this manual (incoming links)